JUS C A1 155-1980 Methods for chemical analysis ofcopper and copper alloys Spectrophotometric determination ofarsenic in copper (for bw concentrations ofarsenic)《铜和铜合金的化学分析方法 光谱法测定.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7470-2008(2015) 2829 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs《评估端拼木螺柱高温性能评价的标准实践规程》.pdf

ASTM D7471-2009 317 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials《全氟烷氧基-碳氧化合物模塑及挤压料的标准规格》.pdf

ASTM D7471-2009(2014) 7271 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials《全氟烷氧基-碳氧化合物模塑及挤压料的标准规范》.pdf

ASTM D7472-2009 402 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials《EFEP -含氟聚合物模塑和挤压材料的标准规范》.pdf

ASTM D7472-2009(2014) 7294 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials《EFEP-含氟聚合物模塑及挤压料的标准规范》.pdf

ASTM D7473-2012 6875 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations《通过敞开式系统养鱼池孵化法在海洋环境中对塑性材料重量消耗的标准试验方.pdf

ASTM D7474-2008 346 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测定挤压或模.pdf

ASTM D7474-2012 3125 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测定挤压或.pdf

ASTM D7474-2017 red 7500 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents《通过浸入各种化学试剂中测.pdf