JUS C A1 197-1979 Methods for chemical analysis of copper and copper alloys Eletrogravimetric determination oflead and copper alloys《铜和铜合金的化学分析方法 电重量法测定铅量和铜合金量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D667-A-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40 % MINERAL FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D667-A-2015 POLYAMIDE (PA) 6 HEAT STABILIZED 40 % MINERAL FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D668-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 43% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D596-A)《43%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D669-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED IMPACT MODIFIED 13% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D591-A)《13%玻璃纤维增强、受热稳定的冲击改性聚酰胺6.pdf

FORD WSK-M4D670-A-2013 POLYPROPYLENE (PP) COPOLYMER MEDIUM HIGH IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D670-A3-2015 POLYPROPYLENE (PP) AND THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) BLEND RECOMPOUNDED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D670-A4-2012 POLYPROPYLENE (PP) COPOLYMER MEDIUM HIGH IMPACT COLOR PIGMENTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 中耐冲击 着色的外部模塑材料 .pdf

FORD WSK-M4D671-A-2005 POLYAMIDE (PA) 46 HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的聚酰胺46成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D671-A2-2005 POLYAMIDE (PA) 46 HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的聚酰胺46成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf