JUS C A1 367-1989 Zinc alloys Complexometric determinatlon of magnesium《锌合金 络合滴定法测定镁量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D789-A-2010 POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT+PC) 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维增强的聚对苯二甲酸.pdf

FORD WSK-M4D789-A2-2010 POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT+PC) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的聚对苯二甲.pdf

FORD WSK-M4D790-A-2010 POLYBUTYLENE TEREPHTHALATE + POLYCARBONATE BLEND (PBT+PC) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚对苯二甲酸.pdf

FORD WSK-M4D791-A1-2008 ABS + POLYCARBONATE BLEND (ABS+PC) MEDIUM IMPACT STRENGTH MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《中等冲击强度模塑料ABS+聚碳酸酯共混物(ABS+PC)(同FORD WSS-M99.pdf

FORD WSK-M4D791-A2-2008 ABS + POLYCARBONATE (ABS+PC) BLEND MEDIUM HEAT RESISTANT IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部.pdf

FORD WSK-M4D791-A3-2008 ABS + POLYCARBONATE (ABS+PC) BLEND MEDIUM HEAT RESISTANT IMPROVED LOW TEMPERATURE IMPACT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部.pdf

FORD WSK-M4D792-A-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐高温丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D792-B1]》.pdf

FORD WSK-M4D792-A2-2011 ABS HIGH HEAT RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部耐高温丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D792-B1]》.pdf

FORD WSK-M4D792-A3-2008 ABS HIGH HEAT RESISTANT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用耐高温丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FOR.pdf