JUS C A1 630-1987 Copper and copper alloys Determination of tin content (Low contents) Flame atomic absorption spec-trometric method《铜及铜合金化学分析方法 锡含量（低含量）测定 火焰原子吸收光谱法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 11406-1975 Blacksmith-s hand and hammer tools Angular bottom swages Design and dimensions《铁匠的手工工具和铁锤 尖角下陷型模 设计和尺寸规格》.pdf

GOST 11407-1975 Blacksmith-s hand and hammer tools Square top set hammers Design and dimensions《手锻和锤锻用锻工工具 矩形下排锤 结构及尺寸》.pdf

GOST 11408-1975 Blacksmith-s hand and hammer tools Rectangular bottom set hammers Design and dimensions《铁匠的手工工具和铁锤 矩形底击平锤 设计和尺寸规格》.pdf

GOST 11409-1975 Blacksmith-s hand and hammer tools Semi-round top set hammer Design and dimensions《手锻和锤锻用锻工工具 半圆形下排锤 结构及尺寸》.pdf

GOST 1141-1974 Slotters Basic dimensions《插床 基本尺寸》.pdf

GOST 11410-1975 Blacksmith-s hand and hammer tools Semi-round bottom set hammer Design and dimensions《铁匠的手工工具和铁锤 半圆形底击平锤 设计和尺寸规格》.pdf

GOST 11411-1975 Blacksmith-s hand and hammer tools Fitting tools Design and dimensions《手锻和锤锻用锻工工具 弯曲用底膜 结构及尺寸》.pdf

GOST 11412-1975 Blacksmith-s hand and hammer tools Bottom swages for bending Design And dimensions《铁匠的手工工具和铁锤 弯曲用下陷型模 设计 和尺寸规格》.pdf

GOST 11413-1975 Blacksmith-s hand and hammer tools Flat flatters Design and dimensions《铁匠的手工工具和铁锤 压平机 设计和尺寸规格》.pdf