JUS C A1 704-1987 Nickel metal feronickel and nickel alloys Determination of sulfur content lodimetric titration method after induction furnace combustion《镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 7716.9-2002 钛合金化学成分光谱分析方法.第9部分 火焰原子吸收光谱法.测定锰含量.pdf

HB 7717-2002 航空钢制件磨削烧伤酸侵蚀检查.pdf

HB 7718.1-2002 碳纤维复合材料层合板湿热环境下层间断裂韧性试验方法.第1部分 Ⅰ型层间断裂韧性试验方法.pdf

HB 7718.2-2002 碳纤维复合材料层合板湿热环境下层间断裂韧性试验方法.第2部分 Ⅱ型层间断裂韧性试验方法.pdf

HB 7722-2002 机械锁紧鼓包型100°沉头铝抽芯铆钉.pdf

HB 7724-2002 机械锁紧鼓包型100°沉头钢抽芯铆钉.pdf

HB 7728-2002 航空用高温合金.涡轮工作叶片精铸件规范.pdf

HB 815-1975 小导柱.pdf

HB 816-1975 导套.pdf