JUS C A4 099-1995 Mechanical testing of metals - Calibration of standardized for verification of Vickers bardness testing machines less than HV 0 2《金属的机械试验 检验维氏硬度试验机（维氏硬度小于0 2）用标准硬.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 8583-3-2003 Manufacturing processes forming under compressive conditions - Part 3 Free forming Classification subdivision terms and definitions《压力成形加工工艺 第3部分 自由成形 分类、细分类、术语和定义》.pdf

DIN 8583-4-2003 Manufacturing processes forming under compressive conditions - Part 4 Die forming Classification subdivision terms and definitions《压力成形加工工艺 第4部分 模具成形 分类、细分类、术语和定义》.pdf

DIN 8583-5-2003 Manufacturing processes forming under compressive conditions - Part 5 Indentation-forming Classification subdivision terms and definitions《压力成形加工工艺 第5部分 压印成形 分类、细分类.pdf

DIN 8583-6-2003 Manufacturing processes forming under compressive conditions - Part 6 Extrusion Classification subdivision terms and definitions《压力成形加工工艺 第6部分 挤出 分类、细分类、术语和定义》.pdf

DIN 8584-1-2003 Manufacturing processes forming under combination of tensile and compressive conditions - Part 1 General Classification subdivision terms and definitions《拉伸和加压成形加工工.pdf

DIN 8584-2-2003 Manufacturing processes forming under combination of tensile and compressive conditions - Part 2 Drawing through constricted tool orifices Classification subdivisio.pdf

DIN 8584-3-2003 Manufacturing processes forming under combination of tensile and compressive conditions - Part 3 Deep drawing Classification subdivision terms and definitions《拉压成形加.pdf

DIN 8584-4-2003 Manufacturing processes forming under combination of tensile and compressive conditions - Part 4 Spinning Classification subdivision terms and definitions《拉伸和加压成形加工.pdf

DIN 8584-5-2003 Manufacturing processes forming under combination of tensile and compressive conditions - Part 5 Forming by raising Classification subdivision terms and definitions.pdf