JUS C A4 217-1994 Copper and copper alloys - Testing of seamless round tubes from copper and copper alloys by eddy flow《铜和铜合金 铜和铜合金制无缝圆管的涡流法检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4289-2003(2008) Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids《润滑脂及润滑液弹性体相容性的标准试验方法》.pdf

ASTM D4289-2013 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids《润滑脂及润滑液弹性体相容性的标准试验方法》.pdf

ASTM D4289-2013(2014)e1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids《润滑脂和润滑液弹性体相容性的标准试验方法》.pdf

ASTM D4290-2007 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions《在加速条件下测定汽车轮轴轴承润滑脂的渗漏倾向用标准试验方法》.pdf

ASTM D4290-2007(2012) Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions《在加速条件下测定汽车车轮轴承润滑脂泄漏倾向的标准试验方法》.pdf

ASTM D4290-2015 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions《在加速条件下测定机动车轮轴承润滑脂渗漏倾向的标准试验方法》.pdf

ASTM D4291-2004 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil《用过的发动机油中微量乙二醇的标准试验方法》.pdf

ASTM D4291-2004(2009) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil《用过的发动机油中痕量乙二醇的标准试验方法》.pdf

ASTM D4291-2004(2013) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil《用过的发动机油中痕量乙二醇标准试验方法》.pdf