JUS C B5 304-1990 Pipevvork Doubie overlap flexible metal hoses (asbestos packing leakproof circular section in prote-cted carbon steel)《管道工程 双层重叠式柔性金属软管（保护性碳钢壁内环形截面的密封石棉胀环型）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10222-1-2017 en Steel forgings for pressure purposes - Part 1 General requirements for open die forgings《承压钢锻件-第1部分 敞口铸模锻件的一般要求》.pdf

EN 10222-2-1999 Steel Forgings for Pressure Purposes - Part 2 Ferritic and Martensitic Steels with Specified Elevated Temperature Properties《压力容器用钢锻件 第2部分 特定高温性能的铁素体和马氏体钢》.pdf

EN 10222-2-2017 en Steel forgings for pressure purposes - Part 2 Ferritic and martensitic steels with specified elevated temperatures properties《承压钢锻件-第2部分 具备特定高温性能的铁素体和马氏体钢》.pdf

EN 10222-3-1998Z Steel Forgings for Pressure Purposes - Part 3 Nickel Steels with Specified Low Temperature Properties《压力容器用钢锻件 第3部分 有规定低温特性的镍钢》.pdf

EN 10222-3-2017 en Steel forgings for pressure purposes Part 3 Nickel steels with specified low temperature properties《承压钢锻件-第3部分 规定低温特性的镍钢》.pdf

EN 10222-4-1998 Steel Forgings for Pressure Purposes - Part 4 Weldable Fine-Grain Steels with High Proof Strength (Incorporates Amendment A1 2001)《压力容器用钢锻件 第4部分 高弹限强度的可焊接细晶粒钢》.pdf

EN 10222-4-2017 en Steel forgings for pressure purposes - Part 4 Weldable fine grain steels with high proof strength《承压钢锻件-第4部分 高弹限强度可焊接细晶钢》.pdf

EN 10222-5-1999 Steel Forgings for Pressure Purposes - Part 5 Martensitic Austenitic and Austenitic-Ferritic Stainless Steels《压力容器用钢锻件 第5部分 马氏体 奥氏体和奥氏体铁素体不锈钢》.pdf

EN 10222-5-2017 en Steel Forgings for Pressure Purposes - Part 5 Martensitic Austenitic and Austenitic-Ferritic Stainless Steels《压力用途的钢锻件-第5部分 马氏体 奥氏体 奥氏体-铁素体不锈钢》.pdf