JUS C D6 400-1987 Wrought copper and copper alloys Hot rolled copper wire (Dip-Forming) Technical requirements《锻铜及铜合金 热轧铜丝（热浸成形） 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 599-2-1995 Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests - Part 2 Classification and Labelling《木材和木.pdf

EN 599-2-2016 en Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2 Labelling《木材和木制产品的耐久性-用生物试验测定木材防腐.pdf

EN 60-1977 en Glass Reinforced Plastics Determination of the Loss on Ignition (Incorporates Amendment A1 1978 Remains Current)《玻璃纤维增强塑料 灼热损耗的测定》.pdf

EN 601-2004 en Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff《铝和铝合金 铸件 与食品接触用铸件的化学成分》.pdf

EN 602-2004 en Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foods.pdf

EN 6029-2017 en Aerospace series - Rod-ends adjustable single fork with UNJ threaded shank min engagement 1 5 x thread diameter in corrosion resisting steel - Dimensions and loads .pdf

EN 603-1-1996 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 1 Technical Conditions for Inspection and Delivery《铝和铝合金 锻造坯料 第1部分 检验和交货的技术条件》.pdf

EN 603-2-1996 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 2 Mechanical Properties《铝和铝合金 锻造坯料 第2部分 机械性能》.pdf

EN 603-3-2000 en Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 3 Tolerances on Dimensions and Form《铝和铝合金 锻造坯料 第3部分 尺寸和形状公差》.pdf