JUS C H1 122-1991 Steel ropes for general purposes Oval standard rope 10x10 Non-rotatlng《通用型钢丝绳 非转动10X10卵圆形标准绳》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 92FTM7-1992 Difference in the Local Stress of the Gear Tooth Root Based On Hobbing Cutters and Pinion Cutters《基于滚齿刀和插齿刀的齿根局部应力的差别》.pdf

AGMA 92FTM8-1992 The Role of Reliability for Bearings and Gears《可靠性对于轴承和齿轮的重要性》.pdf

AGMA 92FTM9-1992 Representative Form Accuracy of Gear Tooth Flanks on the Prediction of Vibration and Noise of Power Transmission《电力传输震动和噪声预测的代表齿面形状精度》.pdf

AGMA 930-A05-2005 Calculated Bending Load Capacity of Powder Metallurgy (P M) External Spur Gears《粉末合金外啮合直齿齿轮的计算抗弯承载力》.pdf

AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears《准双曲面齿轮抗点蚀性和弯曲强度的评级》.pdf

AGMA 933-B03-2003 Basic Gear Geometry《基本齿轮几何结构[代替 AGMA 115.01]》.pdf

AGMA 935-A05-2005 Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers《径向组合齿轮双啮检测装置评估的相关建议》.pdf

AGMA 937-A12-2012 Aerospace Bevel Gears.pdf

AGMA 938-A05-2005 Shot Peening of Gears《齿轮的喷丸强化》.pdf