JUS C H1 305-1982 Gable ioints Shapes and dimensions《电缆接头 形状和尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 21 0389-1984 Forming machines Eccentric and crank presses with operating force below 5000 kn Testing methods《不大于5000 kN操作力偏心及曲柄上压机 测试方法》.pdf

CSN 21 0390-1990 Forming machines Air-hydraulic counter-blow hammers Testing methods《空气 水力反吹式锤子 测试方法》.pdf

CSN 21 0393-1990 Forming machines Progressive automatic machines for forming Testing methods《多工位压力机 探伤法》.pdf

CSN 21 0402-1984 Machines producting plastic articles Series of main parameters《机械造塑料物品 主要参数系列》.pdf

CSN 21 0602-1990 Forming machines Automatic and semiautomatic forming machines Main parameter series《成形加工机械 金属成形加工用自动机械主要参数系列》.pdf

CSN 21 0603-1984 Forming machines Screw presses Main parameter series《螺丝上压机 主要参数系列》.pdf

CSN 21 0605-1989 Forming machines Machine hammers Main parameter series《成形加工机械 锤 主要参数系列》.pdf

CSN 21 0606-1989 Forming machines Shears Main parameter series《成形加工机械剪床 主要参数系列》.pdf

CSN 21 0607-1990 Forming machines Bending machines Main parameter series《成形加工机械弯曲成形机械主要参数系列》.pdf