JUS C H4 072-1980 Tumbuckles Adjusting nuts Stope dimensions and loads《花篮螺丝 调节螺母 形状、尺寸和负荷》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1211 E1211M-2012 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors《使用表面安装的声发射传感器进行泄漏检测和定位的标准实施规程》.pdf

ASTM E1211 E1211M-2017 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors《利用表面安装声发射传感器探测和定位泄漏的标准实施规程》.pdf

ASTM E1211-2007 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors《用表面安装的声辐射探测器作泄漏探测和定位的标准实施规程》.pdf

ASTM E1212-2004 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies《无损检验机构质量管理体系的标准实施规程》.pdf

ASTM E1212-2004(2008) Standard Practice for Quality Management Systems for Nondestructive Testing Agencies.pdf

ASTM E1212-2009 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies《无损检测机构的质量管理系统的标准实施规程》.pdf

ASTM E1212-2012 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies 《无损检测机构质量管理系统的标准实施规程》.pdf

ASTM E1212-2017 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies 《制定无损检测机构质量管理体系的标准实施规程》.pdf

ASTM E1213-1997(2002) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems《热成像系统用可分辨的最小温度差的试验方法》.pdf