JUS C T7 240-1984 Anodic oxidation ofaluminium and aluminium alloys Insulation check by measurement ofbreakdown potential《铝及铝合金的阳极氧化 通过测量击穿电压检查绝缘性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R ISO 14644-7-2007 Cleanrooms and associated controlled environments Part 7 Separative devices (clean air hoods gloveboxes isolators and mini-environments)《无尘室及相关受控环境 第7部分 分离装.pdf

GOST R ISO 14644-8-2014 Cleanrooms and associated controlled environments Part 8 Classification of air cleanliness by chemical concentration《洁净室和相关控制环境 第8部分 采用化学浓度法对空气清洁度的分类》.pdf

GOST R ISO 14644-9-2013 Cleanrooms and associated controlled environments Part 9 Classification of surface cleanliness by particle concentration《洁净室和相关控制环境 第9部分 采用颗粒浓度法对洁净度的分类》.pdf

GOST R ISO 14687-1-2012 Hydrogen fuel Product specification Part 1 All applications except proton exchange membrane (PEM) fuel cell for road vehicles《氢燃料 产品规格 第1部分 道路车辆除质子交换膜(PEM)燃.pdf

GOST R ISO 14708-1-2012 Implants for surgery Active implantable medical devices Part 1 General requirements for safety marking and information to be provided by the manufacturer《外科.pdf

GOST R ISO 1472-1993 Textile machinery and accessories Cylindrical tubes for draw-twisters Dimensions and permissible run-out《纺织机械和配件 拉伸加捻机的圆柱形管 尺寸及可允许偏差》.pdf

GOST R ISO 1479-2013 Hexagon head tapping screws《六角头自攻螺钉》.pdf

GOST R ISO 148-1-2013 Metallic materials Charpy pendulum impact test Part 1 Test method《金属材料 夏比摆锤冲击试验 第1部分 试验方法》.pdf

GOST R ISO 14801-2012 Dentistry Implants Dynamic fatigue tests for endosseous dental implants《牙科学 植入物 骨质牙科植入物的动态疲劳试验》.pdf