JUS D A8 068-1985 Testing ofpywood Determination of bending strength《胶合板检测 抗弯强度测定》.pdf

相关资源

JIS R1601-2008 精细陶瓷抗弯强度试验方法.pdf

HB 5350.3-2004 熔模铸造模料性能试验方法 第3部分 抗弯强度的测定.pdf

HB 5353.3-2004 熔模铸造陶瓷型芯性能试验方法 第3部分 抗弯强度的测定.pdf

HB 5352.1-2004 熔模铸造型壳性能试验方法 第1部分 抗弯强度的测定.pdf

JB T 2980.2-1999 熔模铸造型壳高温抗弯强度试验方法.pdf

GB 1936.1-1991 木材抗弯强度试验方法.PDF

GB T 4741-1999 陶瓷材料抗弯强度试验方法.pdf

GB T 31967.2-2015 稀土永磁材料物理性能测试方法 第2部分：抗弯强度和断裂韧度的测定.pdf

GB T 1936.1-2009 木材抗弯强度试验方法.pdf

HB 5350.3-2004 熔模铸造模料性能试验方法 第3部分：抗弯强度的测定.pdf

猜你喜欢

ASHRAE OR-05-02-3-2005 Pressure Loss Coefficient Measurements of Two Close-Coupled HVAC Elbows.pdf

ASHRAE OR-05-1-1-2005 Design of Air-Cooled R-410A Microchannel Condensers《冷风的R-410A微尺度冷凝器设计》.pdf

ASHRAE OR-05-1-2-2005 Air-Side Thermal-Hlydraulic Performance of Louvered-Fin Flat-Tube Heat Exchangers with Sequential Frost-Growth Cycles《百叶窗翅式 扁管式换热器与顺序冰点增长周期的空气 侧热 水力学的表现》.pdf

ASHRAE OR-05-1-3-2005 Impact of Fouling and Cleaning onn Plate Fin and Spine Fin Heat Exchangers Performance《污垢及清洗onn板翅式和脊椎翅式换热器性能的影响》.pdf

ASHRAE OR-05-10-1-2005 Brazed Plate Heat Exchangers and Their Applications《钎焊板式换热器及其应用》.pdf

ASHRAE OR-05-10-2-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part I Review of Single-Phase and Two-Phase Adiabatic and Flow Boiling Characteristic.pdf

ASHRAE OR-05-10-2005 Symposium on Advances in Brazed-Plate Heat Exchangers for HVAC&R Applications《在HVAC和R应用上的钎焊板式换热器的进步的研讨会》.pdf

ASHRAE OR-05-10-3-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part II Current Research on Evaporators at KTH《钎焊板式换热器的热和水力特性-第2部分 目前的研究对蒸发器在KTH》.pdf

ASHRAE OR-05-10-4-2005 CFD Simulation of Heat Transfer in Compact Brazed Plate Heat Exchangers《紧凑型钎焊板式换热器传热的CFD模拟》.pdf