JUS D E2 106-1979 Furniture General quaUty reguirements《家具 一般质量要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D682-A6-2006 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE BLEND (ASA+PC) HIGH HEAT RESISTANT MOLDING COMPOUND INTERIOR METALLIC EFFECT TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSS-M4D682-A7-2013 ACRYLONITRILE STYRENE ACRYLATE + POLYCARBONATE (ASA+PC) MOLDING COMPOUND MOLD-IN-COLOR EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D683-A2-1995 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 40 DUROMETER D HARDNESS HEAT STABILIZED MOLDING COMPOUND《硬度为40 D的受热稳定的乙醚弹性体（TEEE）热塑性聚酯成型料》.pdf

FORD WSS-M4D684-B1-2014 ABS PC BLEND MEDIUM IMPACT STRENGTH MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D690-B1-2013 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND HIGH HEAT RESISTANT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2017 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D695-B1-2018 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND WASHER FLUID RESERVOIR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B1-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D703-B2-2014 POLYAMIDE (PA) 66 IMPACT MODIFIED HEAT STABILIZED UV STABILIZED 35% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf