JUS D E8 002-1987 Method of testing door leaves under humitidy variations (successive uniform climates)《湿度变异的门扇的检测方法（持续一致气候）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 18113-1-2011 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) Terms definitions and general requirements《体外诊断医疗器械 制造商提供的信息(标签) 术语、.pdf

BS EN ISO 18113-2-2011 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) In vitro diagnostic reagents for professional use《体外诊断医疗器械 制造商提供的信息(.pdf

BS EN ISO 18113-3-2011 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) In vitro diagnostic instruments for professional use《体外诊断医疗器械 制造商提供的.pdf

BS EN ISO 18113-4-2011 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) In vitro diagnostic reagents for self-testing《体外诊断医疗器械 制造商提供的信息(标签) .pdf

BS EN ISO 18113-5-2011 In vitro diagnostic medical devices Information supplied by the manufacturer (labelling) In vitro diagnostic instruments for self-testing《体外诊断医疗器械 制造商提供的信息(标.pdf

BS EN ISO 18125-2017 Solid biofuels Determination of calorific value《固体生物燃料 发热量的测定》.pdf

BS EN ISO 18134-1-2015 Solid biofuels Determination of moisture content Oven dry method Total moisture Reference method《固体燃料 水分含量的测定 烘干法 总水分 参照法》.pdf

BS EN ISO 18134-2-2017 Solid biofuels Determination of moisture content Oven dry method Total moisture Simplified method《固体生物燃料 水分含量的测定 烘干法 总水分 简化方法》.pdf

BS EN ISO 18134-3-2015 Solid biofuels Determination of moisture content Oven dry method Moisture in general analysis sample《固体生物燃料 水分含量的测定 烘干法 一般分析样本中的水分》.pdf