JUS D E8 222-1980 Furniture Determination ofsurface resistance ofthe abrasion point coating《家具 表面对粉点涂层磨损的耐受性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 60191-6-19-2010 Mechanical standardization of semiconductor devices - Part 6-19 Measurement methods of the package warpage at elevated temperature and the maximum permissibl.pdf

DIN EN 60191-6-2-2002 Mechanical standardization of semiconductor devices - Part 6-2 General rules for the preparation of outline drawings of surface mounted semiconductor device p.pdf

DIN EN 60191-6-20-2011 Mechanical standardization of semiconductor devices - Part 6-20 General rules for the preparation of outline drawings of surface mounted semiconductor device.pdf

DIN EN 60191-6-2010 Mechanical standardization of semiconductor devices - Part 6 General rules for the preparation of outline drawings of surface mounted semiconductor device packa.pdf

DIN EN 60191-6-21-2011 Mechanical standardization of semiconductor devices - Part 6-21 General rules for the preparation of outline drawings of surface mounted semiconductor device.pdf

DIN EN 60191-6-22-2013 Mechanical standardization of semiconductor devices - Part 6-22 General rules for the preparation of outline drawings of surface mounted semiconductor device.pdf

DIN EN 60191-6-3-2001 Mechanical standardization of semiconductor devices - Part 6-3 General rules for the preparation of outline drawings of surface mounted semiconductor device p.pdf

DIN EN 60191-6-4-2004 Mechanical standardization of semiconductor devices - Part 6-4 General rules for the preparation of outline drawings of surface mounted semiconductor device p.pdf

DIN EN 60191-6-5-2002 Mechanical standardization of semiconductor devices - Part 6-5 General rules for the preparation of outline drawings of surface mounted semiconductor device p.pdf