JUS F B2 071-1977 Polyacrylonitrile filament tow Technical requirements《聚丙烯腈丝束 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSL-M1A325-A1-2002 STEEL SHEET ZINC NICKEL ALUMINUM RICH ORGANIC COATING TO BE USED WITH FORD WSS-M99P1111-A 《富锌 镍、富铝有机涂层的钢板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSL-M2C191-A-2009 LUBRICANT MODIFIED SAE 80W HYPOID GEAR SULFUR PHOSPHOROUS TO BE USED WITH FORD WSS-M99P1111-A 《准双曲面齿轮用硫磷改性SAE 80W润滑剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSL-M2C192-A-2010 LUBRICANT SAE 75W-140 HYPOID GEAR SYNTHETIC TO BE USED WITH FORD WSS-M99P1111-A 《准双曲面齿轮用SAE 75W-140型合成润滑剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSL-M2D476-A-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 100% RECYCLED RUBBER MODIFIED 50% MINIMUM RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《再生料比例不低于50%的100%再生.pdf

FORD WSL-M4D632-A-2005 POLYTETRAFLUOROETHYLENE (PTFE) SINTER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）熔结成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSL-M4D655-A-2010 THERMOPLASTIC ETHER ESTER ELASTOMER + POLYBUTYLENE TEREPHTHALATE (TEEE+PBT) BLEND MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性醚酯弹性体+聚对苯二甲酸丁二醇酯.pdf

FORD WSL-M4D807-A-2006 POLYPHENYLENE SULFIDE (PPS) 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的聚苯硫醚（PPS）成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSL-M4D807-A-2017 POLYPHENYLENE SULFIDE (PPS) 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSL-M4D910-A-2006 POLYPROPYLENE (PP) HOMOPOLYMER 40 % MINERAL FILLED 25 % MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《回收材料比例最低25%的40%矿物填充的.pdf