JUS F S3 142-1982 Testing (Quantitative analysis) mixtures of fibres Binary mixtures of acetate and certain chlorofibres Glacial acetic acid method《纤维混纺物的检测（定量分析） 醋酸酯和其他某些含氯纤维的两组分混.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25 602-1980 Design calculation and strength testings Methods of mechanical testing of polymeric composite materials Test for compression properties at normal elevated and low .pdf

GOST 25 603-1982 Design calculation and strength testings Methods of mechanical testing of polymeric composite materials Test for tensile properties of ring specimens at normal ele.pdf

GOST 25 604-1982 Design calculation and strength testings Methods of mechanical testing of polymeric composite materials Test for bending properties at normal elevated and low temp.pdf

GOST 25-1990 Internal grinding machines Basic parameters and dimensions Accuracy standards《内圆磨床 基本参数及尺寸，精度规范》.pdf

GOST 252-1975 Rubber Method of test for relative hysteresis and useful elasticity by elongation《橡胶 拉抻时滞后作用和有效弹性测定法》.pdf

GOST 2524-1970 Hexagon nuts with reduced width across flats (high precision) Constructions and dimensions《对边渐薄的六角螺母(高精度) 结构及规格尺寸》.pdf

GOST 2526-1970 Haxagon lock-nuts with reduced width across flats product grade A Construction and dimensions《A级精度小尺寸扳手的六角扁螺母 结构及尺寸》.pdf

GOST 2528-1973 Hexagon slotted nuts with reduced width across flats accuracy class A Construction and dimensions《小尺寸扳手的六角槽形螺母(提高精度) 结构及尺寸》.pdf

GOST 2533-1988 Gauges for staight pipe thread Tolerances《直管螺纹的量规 公差》.pdf