JUS G S2 601-1991 Plastics Determaination of the melt flow rate of thermoplastic《塑料 热塑材料的熔体流动速率的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 28975-1991 Acoustics Measurements of exterior noise emitted by earth-moving machinery Dynamic test condition《声学 挖土机辐射的外噪声的测量 动态方式试验》.pdf

GOST 28976-1991 Photovoltaic devices of crystalline silicon Procedures for temperature and irradiance corrections to measured current voltage characteristics《硅晶体光电仪 伏安特性测量结果的温度与辐射度.pdf

GOST 28978-1991 Lathe assmbly parting and grooving blades Types and basic dimensions《车镗组合切槽与切断刀 型号与基本尺寸》.pdf

GOST 28979-1991 Tool blacks for parting and grooving blades Basic dimensions《车镗组合切槽与切断刀用夹持器 基本尺寸》.pdf

GOST 28980-1991 Cutters for external turning with super hand materials inserts Types and basic dimensions《有超硬材料制的可换切削刀片的外圆与端面车刀 型号与基本尺寸》.pdf

GOST 28981-1991 Cutters for internal turning with super hand materials inserts Types and basic dimensions《有超硬材料制的可换切削刀片的车镗刀 型号与基本尺寸》.pdf

GOST 28982-1991 Pens for fountain pens Specification《自来水钢笔用笔尖 技术条件》.pdf

GOST 28983-1991 Earthing-caving machinery Service tools Part 1 Common maintenance and adjustment tools《挖土机 技术服务用工具 第1部分 维修及调整用工具》.pdf

GOST 28984-2011 Modular coordination of construction dimensions General《结构尺寸的模数协调 总论》.pdf