JUS H B2 044-1987 Propan-2-ol forindustrial use Technical requirements《工业用2-丙醇 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D556-A6-2010 POLYPROPYLENE COPOLYMER 22 % MINERAL FILLED EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用22%矿物填充的聚丙烯（PP）共聚物 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WS.pdf

FORD WSS-M4D556-A7-2006 POLYPROPYLENE PHOSPHORESCENT PIGMENT FILLED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用发磷光颜料填充的聚丙烯（PP） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D556-A8-2011 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 外部22%矿物填充模塑材料 与福特WSS-M99P1111-A.pdf

FORD WSS-M4D556-B8-2017 POLYPROPYLENE (PP) COPOLYMER 22% MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D578-A2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定冲击改良的35%玻璃加强聚酰胺(PA)6模塑材料 与.pdf

FORD WSS-M4D578-B1-2013 POLYAMIDE (PA) 6 HEAT STABILIZED IMPACT MODIFIED 35% GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D579-A2-2007 POLYVINYL CHLORIDE (PVC) OLEFIN MODIFIED - RIGID - HIGH HEAT - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级耐高温刚性烯烃改性聚氯乙烯(PVC) 与标准FORD WSS-M99.pdf

FORD WSS-M4D582-A2-2011 POLYBUTYLENE TEREPHTHALATE (PBT) POLYETHYLENE TEREPHTHALATE HEAT STABILIZED 50% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《热稳定50%玻璃纤维增强聚丁.pdf

FORD WSS-M4D585-B-2011 ABS POLYCARBONATE BLEND (ABS + PC) IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的丙烯腈 聚碳酸酯混合物(ABS + PC) 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D585.pdf