JUS H B8 016-1981 Sulphuric acid and oleum for industrial u se Determination of iron content Flame atomic absorption method《工业硫酸及发烟硫酸 铁元素测定 火焰原子吸收测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 21533-1976 Wood chemical products Method of test by gas chromatography《林化产品 气体色谱分析法》.pdf

GOST 21535-1976 Ranging and hyperbolic radionavigation fixing system Terms and definitions《无线电导航测距和等差测距系统 术语和定义》.pdf

GOST 21536-1976 Colden elder fruits《接骨木浆果》.pdf

GOST 21537-1976 Arorn oaken《橡实》.pdf

GOST 21540-1976 Carbide tipped counterbores for machining stainless and high-temperature steels and alloys Design and dimensions《不锈钢、耐热钢及合金零件加工用镶硬质合金片扩孔钻 结构及尺寸》.pdf

GOST 21541-1976 Carbide tipped inserted brade counterbores for machining stainless and high-temperature steels and alloys Design and dimensions《不锈钢、耐热钢及合金零件加工用镶硬质合金刀片扩孔钻 结构及尺寸》.pdf

GOST 21542-1976 Carbide tipped counterbores for machining stainless and high-temperature steels and alloys Specifications《不锈钢、耐热钢及合金零件加工用镶硬质合金的扩孔钻 结构及尺寸》.pdf

GOST 21543-1976 Solid carbide counterbores with cylindrical shank for machining stainless and high-temperature steels and alloys Design and dimensions《不锈钢、耐热钢及合金零件加工用带圆柱柄整体硬质合金扩孔钻 .pdf

GOST 21544-1976 Solid carbide tipped counterbores with conical shank for machining stainless and high-temperature steels and alloys Design and dimensions《不锈钢、耐热钢及合金零件加工用椎柄整体硬质合金扩孔钻.pdf