JUS H B8 200-1984 Acetic acid for industrial use Determination ofacetic acid content Titrimetric method《工业用乙酸 乙酸成分测定 滴定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1005-2017 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements《测定水硬性混凝土物理测量中使用的质量与体积的标.pdf

ASTM C1005-2018 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements.pdf

ASTM C1006-2007 Standard Test Method for Splitting Tensile Strength of Masonry Units《砌块的拉裂强度的标准试验方法》.pdf

ASTM C1006-2007(2013) Standard Test Method for Splitting Tensile Strength of Masonry Units《砌块拉裂强度的标准试验方法》.pdf

ASTM C1007-2004 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories《承重(横向和轴向)钢龙骨及有关附件安装的标准规范》.pdf

ASTM C1007-2008 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories.pdf

ASTM C1007-2008a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories《承重(横向和轴向)钢骨及有关附件安装的标准规范》.pdf

ASTM C1007-2011 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories《承重(横向和轴向)钢骨及有关附件安装的标准规范》.pdf

ASTM C1007-2011a Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories《安装承重(横向和轴向)钢钉及相关配件的标准规格》.pdf