JUS H F1 010-1986 Oxygen gas Technical reguirements 《氧气 技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 815-2-2014 Rubber vulcanized or thermoplastic Determination of compression set At low temperatures《硫化橡胶或热塑性橡胶 压缩永久变形的测定 低温条件》.pdf

BS ISO 8168-2016 Aerospace Bolts with MJ threads made of heat and corrosion resisting steel strength class 1 100 MPa Procurement specification《航空航天 强度等级为1100MPa、带MJ螺纹的耐腐蚀和耐热钢制螺栓 采购.pdf

BS ISO 817-2014 Refrigerants Designation and safety classification《制冷 命名和安全分类》.pdf

BS ISO 8178-1-2017 Reciprocating internal combustion engines Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions《往复式内燃机 废气排放测量 排气和颗粒废物排放量.pdf

BS ISO 8178-10-2003 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for field measurement of exhaust gas smoke emissions r.pdf

BS ISO 8178-11-2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used ic.pdf

BS ISO 8178-4-2017 Reciprocating internal combustion engines Exhaust emission measurement Steady-state and transient test cycles for different engine applications《往复式内燃机 气体排放测量 不同用.pdf

BS ISO 8178-9-2012 Reciprocating internal combustion engines Exhaust emission measurement Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions frt.pdf

BS ISO 8179-1-2017 Ductile iron pipes fittings accessories and their joints External zinc-based coating Metallic zinc with finishing layer《球墨铸铁管、管件、附件及其接头 外部镀锌 第1部分 终饰层用金属锌》.pdf