JUS H G8 033-1981 Reagents Sulphuric acid Determination of arsenic content Silver diethyldithiocarbamate photometric method《试剂 硫酸 含砷量测定 二乙基氨基二硫代甲硫酸银光度法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 2000FTMS1-2000 Effects of Helix Slope and Form Deviation on the Contact and Fillet Stresses of Helical Gears《螺旋斜度和形状偏离对螺旋齿轮接触和圆角应力的影响》.pdf

AGMA 2001-D04-2004 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth《渐开线正齿轮齿和斜齿轮螺旋齿的基本额定因数和计算方法》.pdf

AGMA 2002-C16-2016 Tooth Thickness and Backlash Measurement of Cylindrical Involute Gearing.pdf

AGMA 2003-C10-2010 Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel Zerol Bevel and Spiral Bevel Gear Teeth《直锥 锥齿轮和螺旋锥齿轮轮齿的耐点蚀和弯曲强度评价》.pdf

AGMA 2004-C08-2008 Gear Materials Heat Treatment and Processing Manual《齿轮材料、热处理和加工手册》.pdf

AGMA 2007-C00-2000 Gears -- Surface Temper Etch Inspection After Grinding《齿轮.磨削后表面回火腐蚀剂的检验》.pdf

AGMA 2008-D11-2011 Assembling Bevel Gears《组装锥齿轮》.pdf

AGMA 2011-B14-2014 Cylindrical Wormgearing Tolerance and Inspection Methods.pdf

AGMA 2015 915-1-A02 SUPP-2002 Accuracy Classification System- Tangential Measurement Tolerance Tables for Cylindrical Gears (Supplemental Tables for AGMA 2015 915-1-A02)《精度分类系统.圆柱形.pdf