JUS H G8 188-1984 Reagents di-Sodium tetraborate decahydrate Determination of heavy metals content (as Pb) Colori- metric method《试剂 硼砂 重金属（以铅计）含量的测定 比色法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22397-1977 Zinc powder Method of spectral analysis《锌粉 光谱分析法》.pdf

GOST 22398-1977 Tap wrenches with one nest for tools with square shanks Basic dimensions《带正方形柄工具用的单插孔扳手 基本尺寸》.pdf

GOST 22399-1977 Tap wrenches with three nests for tools with square shanks Basic dimensions《带正方形柄工具用的三插孔扳手 基本尺寸》.pdf

GOST 22400-1977 Tap wrenches with six nests for tools with square shanks Basic dimensions《带正方形柄工具用的六插孔扳手 基本尺寸》.pdf

GOST 22401-1983 Adjus table tap wrenches Basic dimensions《伸缩螺丝扳手 基本尺寸》.pdf

GOST 22402-1977 Ratchet wrenches Types and basic dimensions《带正方形柄工具用带垫片手扳钻的端扳手 基本尺寸》.pdf

GOST 22406-1977 Timber elements and products for building Method of determining conditional water permeability of water protecting finishes and impregnating compounds《建筑工程用木零件及制品 防.pdf

GOST 22407-1985 Rotating electric machines from 63 to 355 gabarit including General-purpose explicit-pole synchronous generators General specifications《规格为63-355的旋转电机 通用同步发电机 一般技术条.pdf

GOST 22409-1977 Polarimetric plates Technical requirements《旋光计平晶 技术要求》.pdf