JUS H G8 339-1988 Reagents Zine cbloride Deten~ination of zine chloride content E TA (disodium salt) complexometric method《试剂 氯化锌 氯化锌含量的测定 EDTA（二钠盐）络合滴定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI PAC-1-2015 Portable Air Conditioners.pdf

ANSI PAP.1-2012 Security Management Standard Physical Asset Protection.pdf

ANSI PB70-2012 Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities (FDA RECOGNIZED).pdf

ANSI PC63.19 D3.17-2006 American National Standard for Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids《无线通信装置和助听器间兼容性的测量方法用美国国家标准》.pdf

ANSI PIA B151.1-2017 Plastics Machinery Safety Requirements for Injection Molding Machines (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf

ANSI PIA B151.15-2003 Plastics Machinery - Extrusion Blow Molding Machines - Safety Requirements for Manufacture Care and Use (Plastics Industry Association FKA Society of the Plas.pdf

ANSI PIA B151.2-1999 Plastic Film Casting Machinery - Manufacture Care and Use (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf

ANSI PIA B151.20-2013 Safety Requirements for Plastic Sheet Production Machinery (Plastics Industry Association FKA Society of the Plastics Industry Standards (SPI)).pdf

ANSI PIA B151.27-2013 Plastics Machinery Safety Requirements for the Integration of Robots with Injection Molding Machines (Plastics Industry Association FKA Society of the Plastic.pdf