JUS H G8 384-1989 Reagents Calciun nitrate tetrahvdrate Determination of suostances insoluble in water Gravinetric nethod《试剂 四水合硝酸钙 不溶于水的物质的含量测定 重量法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 3871-1995 Non-soldering and soldering compression couplings - Socket unions《非钎焊和钎焊压紧联轴节 套管接头》.pdf

DIN 3872-2012 Non-soldering compression couplings - Union nuts for butt joints《非焊接压紧联轴节 对接结构活接头螺母》.pdf

DIN 388-1-1996 Hand-wheels of plastic with ripple ring《带波形轮缘的塑料手轮》.pdf

DIN 39-2003 Fixed ball handles《固定式球形手柄》.pdf

DIN 390-2002 Hand-wheels dished - Hub hole with straight square《碟形手轮 方头直式毂孔》.pdf

DIN 3900-2001 Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread《带有切割环系列LL的非焊接压缩配件 带锥形螺纹的直形末端》.pdf

DIN 3903-2001 Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的肘形螺栓(不用于新设计)》.pdf

DIN 3904-1987 Olive type compression couplings male stud elbows《椭圆形压接管接头 螺柱式插接肘节管》.pdf

DIN 3906-2001 Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)《带有切割环的非焊接压缩配件 带锥形螺纹末端的分支T形螺栓(不用于新设计)》.pdf