JUS H G8 448-1990 Reagents Zine sulphate heptahydrate Determination of iron content Colorimetric method《试剂 七水合硫酸锌 铁含量测定 比色法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESF-M4D373-A-2008 ABS HIGH TEMPERATURE - MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯 高温模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSB-M4D690-A FORD WSB-M4D6.pdf

FORD ESF-M4D387-A-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED IMPROVED TOUGHNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、强度改进型聚酰胺66(PA66)成型料 与标准FORD WSS-M99P1111.pdf

FORD ESF-M4D405-B-2011 POLYETHYLENE TEREPHTHALATE (PET) 45 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 45%玻璃纤维增强模塑材料 与福特WSS-M99.pdf

FORD ESF-M4D405-C1-2011 POLYETHYLENE TEREPHTHALATE (PET) 30 % GLASS REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 30%玻璃纤维增强模塑材料 与福特WSS-M99P1111.pdf

FORD ESF-M4D405-C2-2010 POLYETHYLENE TEREPHTHALATE (PET) 30 % GLASS REINFORCED MOLDING COMPOUND SELF-EXTINGUISHING (SE) TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 30%玻璃纤.pdf

FORD ESF-M4D405-C3-2011 POLYETHYLENE TEREPHTHALATE (PET) 30 % GLASS FIBER REINFORCED HIGH MELT FLOW RATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 30%玻.pdf

FORD ESF-M4D405-D-2010 POLYETHYLENE TEREPHTHALATE (PET) 35 % GLASS FIBER MICA REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESF-M4D405-B)《聚乙烯对苯二甲.pdf

FORD ESF-M4D405-D2-2010 POLYETHYLENE TEREPHTHALATE (PET) 45 % GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸酯(PET) 45%玻璃纤维 矿物增强模塑材料.pdf

FORD ESF-M4D409-A-2009 ACETATE BUTYRATE SHEET LIGHT CONTROL TO BE USED WITH FORD WSS-M99P1111-A 《灯光控制用醋酸丁酸纤维板 与标准FORD WSS-M99P1111-A一起使用 》.pdf