JUS H M8 119-1982 Carbon black for use in the rubber industry Determination of dibutylphtalate absorption number Met- hod using absorptometar《橡胶工业用炭黑 邻苯二甲酸二丁酯吸收值的测定 吸收计法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASME B40 200-2008 Thermometers Direct Reading and Remote Reading《直接和远程读数温度计》.pdf

ASME B46 1-2002 Surface Texture Surface Roughness Waviness and Lay (B46 1 - 2002)《表面特征(表面粗糙度、波纹度和花纹方向)》.pdf

ASME B46 1-2009 Surface Texture (Surface Roughness Waviness and Lay)《表面纹理(表面粗糙度 波纹度和花纹方向)》.pdf

ASME B47 1 ERTA-2010 Gage Blanks《ASME B47 1-2007标准勘误 量规半成品》.pdf

ASME B47 1-2007 Gage Blanks《量规毛坯》.pdf

ASME B5 10-1994 Machine Tapers《机用锥度 自锁和大锥度系列》.pdf

ASME B5 11-1964 SPINDLE NOSES AND ADJUSTABLE ADAPTERS FOR MULTIPLE SPINDLE DRILLING HEADS《多轴钻床床头箱的轴头和可调接续器》.pdf

ASME B5 18-1972 Spindle Noses and Tool Shanks for Milling Machines《铣床的轴头和刀柄》.pdf

ASME B5 1M-1985 T-Slots Their Bolts Nuts and Tongues (Revision of ANSI B5 1-1975 Should Be Used Instead of ANSI B5 1 Which Was Cancelled in 1985)《T型槽及其螺栓 螺母和榫舌》.pdf