JUS H P1 502-1991 Pesticides Wettable powder Technical requirements《农药 可湿性粉剂 技术要求》.pdf

相关资源

HG 3289-2000 代森锌可湿性粉剂.pdf

HG 3290-2000 多菌灵可湿性粉剂.pdf

HG 3671-2000 吡虫啉可湿性粉剂.pdf

HG 3718-2003 氯嘧磺隆可湿性粉剂.pdf

HG 3720-2003 50﹪苯噻酰草胺可湿性粉剂.pdf

HG T 2467.3-1996 农药可湿性粉剂产品标准编写规范.pdf

HG T 3884-2006 代森锰锌·霜脲氰可湿性粉剂.pdf

HG T 3886-2006 苄嘧黄隆·二氯喹啉酸可湿性粉剂.pdf

HG T 2743.2-1996 农药复配可湿性粉剂产品标准编写规范.pdf

HG 2161-1991 三环唑可湿性粉剂.pdf

猜你喜欢

FORD ESA-M4D472-A-2006 POLYPROPYLENE COPOLYMER INJECTION MOLDED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-C)《聚丙烯（PP）共聚物注塑塑料 与标准FORD WSS-M99P1111-A一起使用 使用WSS-M4D638-C》.pdf

FORD ESA-M4D568-A-2010 THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND 40% LONG GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维填充的热塑性聚氨酯（TPU）成型料 与标准FORD WSS-M.pdf

FORD ESA-M4D57-A-2009 POLYURETHANE (PUR) FOAM OPEN FINE CELL TO BE USED WITH FORD WSS-M99P1111-A 《小开孔聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4D614-A-2005 POLYVINYL CHLORIDE (PVC) PLASTISOL TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯（PVC）塑性溶胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M4G294-A-1988 SEALER SILICONE RUBBER - NEUTRAL CURE《中性固化的硅橡胶密封剂》.pdf

FORD ESA-M4P8-C-2003 HARDCOAT ANODIZE FINISH FOR ALUMINUM - UNSEALED TO BE USED WITH FORD WSS-M99P1111-A 《用于不密封的铝面的阳极化处理硬涂层 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESA-M5P7-A-1983 METALLIZE SECOND SURFACE DECORATIVE EXTERIOR《汽车外部用第二面涂覆金属的装饰材料》.pdf

FORD ESA-M62J13-B-2012 PAINT WATERBORNE ANODIC ELECTROCOAT ACRYLIC ENAMEL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESA-M62J15-A-2012 PAINT WATER BORNE - DIP - HIGH GLOSS BLACK TO BE USED WITH FORD WSS-M99P1111-A .pdf