JUS K B1 260-1989 Forging hammer for scythe Yugoslav type《镰刀用南斯拉夫（Tugoslav）式锻锤》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WRS-M4D1022-A1-2013 POLYPROPYLENE (PP) COPOLYMER 10% RICE HULL FILLED MOLDING COMPOUND RECYCLED GRADE 25% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WRS-M4D1022-A2-2014 POLYPROPYLENE (PP) COPOLYMER 10% RICE HULL FILLED MOLDING COMPOUND RECYCLED GRADE 90% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown o.pdf

FORD WRS-M4D1029-A2-2016 POLYAMIDE (PA) 66 HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND 60% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WRS-M4D1058-A1-2015 POLYPROPYLENE (PP) MOLDING COMPOUND HOMOPOLYMER HEAT STABILIZED 35% GLASS FIBER MINERAL REINFORCED 100% PCR PIR RESIN CONTENT 65% RECYCLED MATERIAL BY WEIG.pdf

FORD WRS-M4D1058-A2-2015 POLYPROPYLENE (PP) MOLDING COMPOUND HOMOPOLYMER HEAT STABILIZED 45% GLASS FIBER MINERAL REINFORCED 100% PCR PIR RESIN CONTENT 55% RECYCLED MATERIAL BY WEIG.pdf

FORD WRS-M4D1062-A1-2017 POLYAMIDE (PA66) HEAT STABILIZED 40% SHORT CARBON FIBER FILLED MOLDING COMPOUND 40% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WRS-M4D145-B2-2014 POLYETHYLENE (PE) MOLDING COMPOUND HIGH DENSITY 100% PCR RESIN INTERIOR TO BE USED WITH FORD WSS - M99P1111 - A .pdf

FORD WRS-M4D366-B2-2013 POLYAMIDE (PA6 6) 25% GLASS FIBER MINERAL REINFORCED HEAT STABILIZED MOLDING COMPOUND 75% PCR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on .pdf

FORD WRS-M4D483-D2-2015 ACRYLONITRILE BUTADIENE STYRENE (ABS) MOLDING COMPOUND RECYCLED 100% PIR RESIN CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D483-D1).pdf