JUS K D2 022-1989 Shell end mills with tenon drive Dfmensions《榫传动套式立铣刀 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 65443-1984 Aerospace bihexagonal head bolts close tolerance with MJ-thread medium thread length in steel nominal tensile strength 1800 MPa for temperatures up to 235 C《航空和航天 带M.pdf

DIN 65444-1993 Aerospace rivets 100 countersunk head nickel alloy metric series《航空航天 米制系列镍合金100沉头铆钉》.pdf

DIN 65445-1987 Aerospace rivets 100 reduced countersunk head metric series nickel alloys《航空航天 镍合金制米制系列小埋头铆钉100》.pdf

DIN 65446-1993 Aerospace rivets universal head nickel alloys metric series《航空航天 米制系列镍合金通用头铆钉》.pdf

DIN 65447-2016 Aerospace series - Bihexagonal head bolts close tolerance with medium-length MJ thread corrosion resisting nickel alloy - Nominal tensile strength 1 550 MPa for temp.pdf

DIN 65448-1988 Aerospace structural adhesives wedge test《航空航天 结构粘合剂 楔形粘合试验》.pdf

DIN 65451-2003 Aerospace - Thread inserts with MJ thread locked screw-locking steel Classification 900 MPa 1100 MPa 235 C《航空航天 带MJ螺纹的闭锁、螺钉锁紧的钢制丝套 等级 900MPa 1100 MPa 235℃》.pdf

DIN 65452-1988 Aerospace spotlights with 100 mm 134 mm and 200 mm effective diameter technical specification《航空航天 有效直径为100mm，134mm和 200mm聚光灯 技术规范》.pdf

DIN 65453-1993 Aerospace preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin technical specification《航空航天 碳纤维和双马来酰亚胺树脂或聚酰亚胺树脂制的预浸渍不定向薄板材》.pdf