JUS K D2 040-1989 Side and face milling cutters with staggered teeth and with straight teeth Dimensions《带有错齿和直齿的三面刃铣刀 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 16841-2014 en Steel wire ropes - Pulling eyes for rope installation - Types and minimum requirements《钢丝绳 绳索安装用拉孔 类型和最低要求(ISO 16841 2014)》.pdf

EN ISO 16851-2013 en Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt《纺织品输送带 循环式(叠接)输送带的净长度测定》.pdf

EN ISO 16852-2010 5000 Flame arresters - Performance requirements test methods and limits for use《灭火器 性能要求 试验方法和使用限制》.pdf

EN ISO 16852-2016 en Flame arresters - Performance requirements test methods and limits for use《阻火器的性能要求 试验方法和使用限制(ISO 16852 2016)》.pdf

EN ISO 16859-1-2015 en Metallic materials - Leeb hardness test - Part 1 Test method《金属材料 里氏硬度试验 第1部分 试验方法（ISO 16859-1 2015）》.pdf

EN ISO 16859-2-2015 en Metallic materials - Leeb hardness test - Part 2 Verification and calibration of the testing devices《金属材料 里氏硬度试验 第2部分 测试设备的检定和校准（ISO 16859-2 2015）》.pdf

EN ISO 16859-3-2015 en Metallic materials - Leeb hardness test - Part 2 Verification and calibration of the testing devices《金属材料 里氏硬度试验 第3部分 参考测试块的校准（ISO 16859-3 2015）》.pdf

EN ISO 16862-2006 en Paints and varnishes - Evaluation of sag resistance《色漆和清漆 抗流挂性评定》.pdf

EN ISO 16871-2003 en Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering《塑料管道系统 塑料管道和配件 自然风化法 代替EN 1056-1996 ISO 1687.pdf