JUS K D3 280-1987 ore drills Technical reguirements forcore dril s with shank《空心钻 带柄空心钻的技术要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4645-1992 加工铝合金用麻花钻钻槽铣刀 用于直径4.10~30.00mm的麻花钻.pdf

HB 4646-1992 样板及校对样板 检验1560401~514钻槽铣刀截形用.pdf

HB 4647-1992 镶硬质合金刀片的直柄麻花钻 d=5~12mm.pdf

HB 4648-1992 镶硬质合金刀片的锥柄麻花钻 d=6~30mm.pdf

HB 4649-1992 镶硬质合金刀片的直柄斜槽钻头 d=2.5~9.5mm.pdf

HB 465-1965 变形铝合金气焊接头的质量检验及缺陷修补标准.pdf

HB 4650-1992 镶硬质合金刀片的钻头技术条件.pdf

HB 4651-1992 钻槽铣刀用于直径5~30mm的钻头.pdf

HB 4652-1992 样板和校对样板 检验HB 4651-92 钻槽铣刀用.pdf