JUS K D3 312-1987 Para lel sJiankcountersunks 9(f with solid pilot《带导正销的直柄锥面锪钻》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 17760-1972 Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm Design and basic dimensions《直径为52-100 mm的具有不完整螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17761-1972 Threaded plug-gauges with full of thread of diameter from 105 to 300 mm Design and basic dimensions《直径为105-300 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17762-1972 Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm Design and basic dimensions《直径105mm～300mm带短牙型螺纹的螺纹塞规 结构及基本尺寸》.pdf

GOST 17763-1972 Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17764-1972 Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm Design and basic dimensions《直径为2-100 mm的具有不完整螺纹的螺纹环规 设计和基本尺寸规格》.pdf

GOST 17765-1972 Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm Design and basic dimensions《直径为105-300 mm的具有全螺纹的螺纹环规 设计和基本尺寸规格》.pdf

GOST 17766-1972 Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm Design and basic dimensions《直径为105-300 mm的具有不完整螺纹的螺纹环规 设计和基本尺寸规格》.pdf

GOST 17767-1972 Screw-in handles for plug-gauges and ring-gaugess Design and basic dimensions《塞规和环规的拧入手柄 设计和基本尺寸规格》.pdf

GOST 17768-1990 Medicine remedies Packing marking transportation and storage《医用药物 包装 标识 运输和贮存》.pdf