JUS K D4 001-1982 Files and rasps Definitions of terms and types《锉刀和粗锉刀 术语定义和类型》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB 50613-2010 城市配电网规划设计规范.pdf

GB 50614-2010 跨座 式单轨交通施工及验收规范.pdf

GB 50615-2010 冶金工业水文地质勘察规范.pdf

GB 50616-2010 铜冶炼厂工艺设计规范.pdf

GB 50617-2010 建筑电气照明装置施工与验收规范.pdf

GB 50618-2011 房屋建筑和市政基础设施工程质量检测技术管理规范.pdf

GB 50620-2010 粘胶纤维工厂设计规范.pdf

GB 50628-2010 钢管混凝土工程施工质量验收规范.pdf

GB 50629-2010 板带轧钢工艺设计规范.pdf