JUS K T3 050-1983 Complex snap gauges for diameters to 6 mm nominal si e《适用于标称尺寸小于6毫米的直径的复合卡尺》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 2-2005 Classification of fires German version EN 2 1992 + A1 2004《火灾分级》.pdf

DIN EN 20-1-1992 Wood preservatives determination of the effectiveness against Lyctus brunneus (Stephens) part 1 application by surface treatment (laboratory method) german version.pdf

DIN EN 20-2-1993 Wood preservatives determination of the protective effectiveness against Lyctus brunneus (Stephens) part 2 application by impregnation (laboratory method) German v.pdf

DIN EN 200-2008 Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification English version of DIN EN 200 20.pdf

DIN EN 2002-001 Berichtigung 1-2007 Aerospace series - Metallic materials - Test methods - Part 1 Tensile testing at ambient temperature German and English version EN 2002-001 2005.pdf

DIN EN 2002-001-2006 Aerospace series - Metallic materials - Test methods - Part 1 Tensile testing at ambient temperature German and English version EN 2002-001 2005《航天航空系列 金属材料 试验.pdf

DIN EN 2002-002 Berichtigung 1-2007 Aerospace series - Metallic materials - Test methods - Part 2 Tensile testing at elevated temperature German and English version EN 2002-002 200.pdf

DIN EN 2002-002-2006 Aerospace series - Metallic materials - Test methods - Part 2 Tensile testing at elevated temperature German and English version EN 2002-002 2005《航天航空系列 金属材料 试.pdf

DIN EN 2002-005-2008 Aerospace series - Test methods for metallic materials - Part 005 Uninterrupted creep and stress-rupture testing German and English version EN 2002-005 2007《航空.pdf