JUS K T3 052-1983 Snap gauges range above 5 to and including 160 mm nominal si e《适用于标称直径在5-160毫米（含）的卡规》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2127-1980 Aluminium Alloy 7075-T7351 Bars and Sections A Less Than or Equal to 100 mm Aerospace Series Edition 1《航空航天系列.铝合金7075-T7351板材和棒材6mm＜a小于或等于100mm.第1版》.pdf

AECMA PREN 2128-1985 Aerospace Series Aluminium Alloy 7075-T7351 Drawn Bar a Less Than or Equal to 75 mm Edition 2《航空航天系列.铝合金7075-T7351冷拉板材a小于或等于75mm 2版》.pdf

AECMA PREN 2130-1995 Aerospace Series Corrosion Resisting Steel Precision Ball Bearings for Instruments and Equipment Technical Specification Editio P 1《航空航天系列.工具和设备用耐蚀钢精密滚珠轴承交货技术条.pdf

AECMA PREN 2131-1989 Aerspace Series Plates Aluminium and Aluminium Alloys Edition 2《航空航天系列.铝和铝合金薄板2版》.pdf

AECMA PREN 2132-1982 Electrodeposition of Chromium for Engineering Purposes Aerospace Series Edition 1《航空航天系列.工程用途铬电解.第1版》.pdf

AECMA PREN 2133-1995 Aerospace Series Cadmium Plating of Steels with Maximum Specified Tensile Strength Equal to or Less Than 1 450 MPa Copper Copper Alloys and Nickel Alloys Editi.pdf

AECMA PREN 2135-1986 Aerospace Series Steel FE-PL61 Carburized Hardened and Tempered Bar De Less Than or Equal to 40 mm Issue P 1《航空航天系列.FE-PL61渗碳 淬火 调节钢板材De小于或等于40mm P.第1版》.pdf

AECMA PREN 2136-1979 Steel FE-PM42 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 100 mm Aerospace Series Edition 1《航空航天系列.FE-PM42钢板材.pdf

AECMA PREN 2137-1981 Steel FE-PL75 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bars De Less Than or Equal to 100 mm Aerospace Series Edition 1《航空航天系列.FE-PL75钢板.pdf