JUS K T3 122-1983 GO and NO TGO plug gauges for holes from f to and including 50 mm nominal diameter《适用于标称直径在1- 50毫米（含）的孔洞的过端和不过端塞规》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNCA-C11-12：2014 强制性产品认证实施规则 汽车座椅及座椅头枕.pdf

CNCA-C11-13：2014 强制性产品认证实施规则 车身反光标识.pdf

CNCA-C11-14：2014 强制性产品认证实施规则 汽车行驶记录仪.pdf

CNCA-C13-01：2014 强制性产品认证实施规则安全玻璃.pdf

CNCA-C14-01：2014 强制性产品认证实施规则农机产品.pdf

CNCA-C16-01：2014 强制性产品认证实施规则电信终端设备.pdf

CNCA-C18-01：2014 强制性产品认证实施规则 火灾报警产品.pdf

CNCA-C18-02：2014 强制性产品认证实施规则 火灾防护产品.pdf

CNCA-C18-03：2014 强制性产品认证实施规则 灭火设备产品.pdf