JUS K T3 130-1983 GO gauging members for holes over 40 up to and inckiding 120 mm nominal diameter《GO 钻孔螺旋塞计量器大于40 到120 毫米包括120毫米 公称口径》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4683-2010 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00.pdf

ASTM D4683-2013 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150&8201.pdf

ASTM D4683-2017 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150&x200.pdf

ASTM D4684-2007 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature《低温下发动机油的屈服应力和表观粘度用标准试验方法》.pdf

ASTM D4684-2007e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature.pdf

ASTM D4684-2008 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature《发动机油在低温下表观粘度和弯曲应力测定的试验方法》.pdf

ASTM D4684-2012 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature《发动机油在低温下表观粘度和弯曲应力测定的试验方法》.pdf

ASTM D4684-2014 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature《用于测定低温时发动机油屈服应力和表观粘度的标准试验方法》.pdf

ASTM D4684-2017 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature《测定发动机油在低温下屈服应力和表观粘度的标准试验方法》.pdf