JUS L G7 100-1981 Pulse technigues and apparatus Pulse terms and definitions《脉冲技术及设备 脉冲术语及定义》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D755-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度为55 D的热塑性聚氨酯弹性体(TPU) 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D755-A2-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 40 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D755-A1)《硬度为40 D的热塑性聚氨酯弹性体(TPU) 与标.pdf

FORD WSK-M4D755-A3-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR) 65 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度65 D的热塑性聚氨酯弹性体(TPUR)成型料 与标准FO.pdf

FORD WSK-M4D758-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物混合物填充的聚丙烯(PP)自熄灭成型料 与标准FO.pdf

FORD WSK-M4D758-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物混合物填充的聚丙烯(PP)自熄灭成型料 与标准FO.pdf

FORD WSK-M4D759-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%矿物填充的聚丙烯(PP)自熄灭成型料 与标准FORD .pdf

FORD WSK-M4D759-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%矿物填充的聚丙烯(PP)自熄灭成型料 与标准FORD .pdf

FORD WSK-M4D760-A-2006 POLYPROPYLENE (PP) COPOLYMER SELF-EXTINGUISHING MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《自熄灭型聚丙烯(PP)共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 [替代 FO.pdf

FORD WSK-M4D761-A-2010 POLYCARBONATE (PC) MEDIUM MELT FLOW RATE MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部聚碳酸酯(PC)中熔态流动率的模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福.pdf