JUS L N1 110-1991 Hydraulic fluid power Quick-action couplings Dimensions and requirements《液压传动 速动离合器 尺寸与要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19064-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔的五棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19065-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔和单侧有切屑槽的五棱形多面的硬.pdf

GOST 19067-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的有孔的六棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19068-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的有孔的和单侧有切屑槽的六棱形多面的硬.pdf

GOST 19069-1980 Round throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的圆形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19070-1980 Round throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔的圆形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19071-1980 Round throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔的和单侧有切屑槽的圆形多面硬质合金切.pdf

GOST 19072-1980 Round throw-away (indexable) carbide cutting inserts with end-clearance angle cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的.pdf

GOST 19073-1980 Triangular throw-away (indexable) carbide shims Design and dimensions《可转位的多面正三棱形硬质合金支承刀片 结构及尺寸》.pdf