JUS M B0 271-1977 ISO Metric trapezoidal intemal screw threadsfrom 8 to 100 mm diameter limits《ISO 公称梯形内螺纹 8-100 毫米口径，限制》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16361-1987 Wood flour Specifications《木粉 规范》.pdf

GOST 16362-1986 Wood flour Test methods《木粉 测试方法》.pdf

GOST 16363-1998 Fire protective means for wood Methods for determination of fire protective properties《木材防护剂 用陶管法测定涂层的防火特性和浸渍成分》.pdf

GOST 16367-1986 Poultry-processing industry Terms and definitions《禽类品加工工业 术语和定义》.pdf

GOST 16369-1996 Sawn timber transportation packages Sizes《锯材的运输包装 尺寸》.pdf

GOST 16370-1980 Induction heating installations for higher frequencies General specifications《高频率感应加热装置 通用规范》.pdf

GOST 16376-1970 Die blocks of sizing dies Construction and dimensions《精压模架 结构及尺寸》.pdf

GOST 16377-1970 Die blocks of sizing dies with rear location of guide posts Construction and dimensions《带后导柱精压模架 结构及尺寸》.pdf

GOST 16378-1970 Die blocks of sizing dies with central location of guide posts Construction and dimensions《带中间导柱精压模架 结构及尺寸》.pdf