JUS M B1 852-1984 Union nuts for taper bush type tube unions for buttjoints Shape and dimensions《连接螺母，对抵接头锥形衬套型管道连接 外形及尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24819-1981 Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《外径定心直齿六花键孔用变切削量组合.pdf

GOST 24820-1981 Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter alternatives Design and dimensions《变切削量外径定心的直齿六花键孔复合拉刀 双次 结构及尺寸》.pdf

GOST 24821-1981 Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter alternatives Double driven Design and dimensions《变切削量的外径定心直齿花键孔复合拉.pdf

GOST 24822-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter alternatives Design and dimension《变切削量外径定心的直齿十花键孔复合拉刀 结构及尺寸》.pdf

GOST 24823-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter alternatives Donble driven Design and dimensions《变切削量外径定心的直齿十花键孔复.pdf

GOST 24824-1988 Ironing presses Main dimensions technical requirements and test methods《熨平压机 基本尺寸，技术要求和试验方法》.pdf

GOST 24827-1981 Radiators optical medical Terms and definitions《医用光学照射器 术语和定义》.pdf

GOST 24829-1981 The sets of three casette press moulds for manufacturing of rubber sealing cups Design and dimensions《制造橡胶密封皮碗用压模三盒组件 结构及尺寸》.pdf

GOST 24830-1981 Concrite refractories Ultrasonic method of quality control《耐火混凝土制品 超声波质量控制方法》.pdf