JUS M C3 328-1988 Plain bearings MetaliJe multilayer plain bearings Non-destructive ultrasonic testing of boud for bearing metal layer tbicknesses above Z mm《普通轴承 金属多层普通轴承 厚度超过 Z 毫.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ 21219-2016 电子装备基于模型定义的机加工刀具符号表示法.pdf

SJ 21220-2016 电子装备基于模型定义的机加工工艺参数表示法.pdf

SJ 21221-2016 电子装备基于模型定义的机加工工艺方法表示法.pdf

SJ 21222-2016 电子装备基于模型定义的协同设计通用要求.pdf

SJ 21223-2016 电子装备基于模型定义数据集要求.pdf

SJ 21224-2016 电子装备基于模型定义数据组织要求.pdf

SJ 21225-2016 电子装备结构有限元力学分析建模要求.pdf

SJ 21226-2016 电子装备逆向工程三维建模技术要求.pdf

SJ 2687-1986 中心安装的KX06型旋转片式开关（低电负荷）最多12位、最大直径16毫米.pdf