JUS M C3 501-1991 Rolling bearings Vocabular《滚动轴承 词汇》.pdf

相关资源

JIS B0124-2009 滚动轴承量值符号.pdf

JJF 1089-2002 滚动轴承径向游隙测量仪校准规范.pdf

JB T 1255-2001 高碳铬轴承钢滚动轴承零件 热处理技术条件.pdf

JB T 1255-2014 滚动轴承高碳铬轴承钢零件 热处理技术条件.pdf

JB T 1460-2002 高碳铬不锈钢滚动轴承零件 热处理技术条件.pdf

JB T 1460-2011 滚动轴承 高碳铬不锈钢轴承零件 热处理技术条件.pdf

JB T 11841-2014 滚动轴承零件金属实体保持架 技术条件.pdf

JB T 10336-2002 滚动轴承及其零件补充技术条件.pdf

JB T 10337-2002 滚动轴承零件 冲压保持架 技术条件.pdf

JB T 10338-2002 滚动轴承零件磁粉探伤规程.pdf

猜你喜欢

ASTM D6022-2006(2012) 3125 Standard Practice for Calculation of Permanent Shear Stability Index《永久剪切稳定性指数计算的标准操作规程》.pdf

ASTM D6023-2002 Standard Test Method for Unit Weight Yield Cement Content and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)《可控制的低强度材料(CLSM)中空气含量、水泥含量、弯曲度和单位重.pdf

ASTM D6023-2007 374 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的密度(单位.pdf

ASTM D6023-2015 1764 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料 (CLSM) 的密度.pdf

ASTM D6023-2016 red 5338 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的.pdf

ASTM D6024 D6024M-2015 8935 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《采用球落在可控制的低强度材料 (CLSM) 上的方法测定.pdf

ASTM D6024 D6024M-2016 red 6109 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性.pdf

ASTM D6024-2002 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性的标准试验方法》.pdf

ASTM D6024-2007 752 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《在受控低强度材料上方进行球落体运动确定道路建筑适宜性的标准试验方法》.pdf