JUS M D1 511-1987 Lifts Installation of IV class lifts Dimensions capacity and speeds《升降机 安装IV及升降机尺寸，负载及速度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JIS Z 2320-3-2007 Non-destructive testing---Magnetic particle testing---Part 3 Equipment.pdf

JIS Z 2321：1993 AC yoke magnet for magnetic particle testing.pdf

JIS Z 2323：2005 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions.pdf

JIS Z 2329：2002 Methods for bubble leak testing.pdf

JIS Z 2330：1992 Standard recommended guide for the selection of helium leak testing.pdf

JIS Z 2331：2006 Method for helium leak testing.pdf

JIS Z 2332：1993 Test method for leaks using the pressure change measurement.pdf

JIS Z 2333：2005 Test method for leaks using ammonia gas.pdf

JIS Z 2340：2002 Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing.pdf