JUS M E6 081-1980 Radiators convectors and similar appliances Determination of thermal output Test method using air-cooled closed booth《散热器、环流器和类似设备 热功率输出测定 风冷式密闭罩测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 16455-2008 条式和框式水平仪.pdf

GB T 16456.1-2008 硬质合金螺旋齿立铣刀.第1部分 直柄立铣刀.型式和尺寸.pdf

GB T 16456.2-2008 硬质合金螺旋齿立铣刀.第2部分 7 24锥柄立铣刀.型式和尺寸.pdf

GB T 16456.3-2008 硬质合金螺旋齿立铣刀.第3部分 莫氏锥柄立铣刀.型式和尺寸.pdf

GB T 16456.4-2008 硬质合金螺旋齿立铣刀.第4部分 技术条件.pdf

GB T 16457.1-2009 超硬材料锯片基体尺寸.第1部分 用于建筑物和土木工程材料的机械切割.pdf

GB T 16457.2-2009 超硬材料锯片基体尺寸.第2部分 用于建筑物和土木工程材料的手持切割.pdf

GB T 16458-2009 磨料磨具术语.pdf

GB T 16459-1996 面铣刀寿命试验.pdf