JUS M J2 105-1985 Equipment forpetroleum and naturalgas industries Cas -ng and tubing for oil or natura!gas vvells《石油天然气工业材料及设备 油气井铸铁管道》.pdf

相关资源

AQ 2012-2007 石油天然气安全规程.pdf

DZ T 0185-1997 石油天然气地球化学勘查技术规范.pdf

SY 0470-2000 石油天然气管道跨越工程施工及验收规范.pdf

SY 4116-2008 石油天然气管道工程建设监理规范.pdf

SY 4200-2007 石油天然气建设工程施工质量验收规范通则.pdf

SY 4203-2007 石油天然气建设工程施工质量验收规范站内工艺管道工程.pdf

SY 4204-2007 石油天然气建设工程施工质量验收规范油气田集输管道工程.pdf

SY 4205-2007 石油天然气建设工程施工质量验收规范自动化仪表工程.pdf

SY 4206-2007 石油天然气建设工程施工质量验收规范电气工程.pdf

SY 4207-2007 石油天然气建设工程施工质量验收规范管道穿跨越工程.pdf

猜你喜欢

ASTM D3258-2004(2010)e1 Standard Test Method for Porosity of White or Near White Paint Films by Staining《染色法进行白色或近白色漆膜孔隙率的标准试验方法》.pdf

ASTM D3258-2004(2014) Standard Test Method for Porosity of White or Near White Paint Films by Staining《采用染色法测定白色或近白色涂料薄膜孔隙度的标准试验方法》.pdf

ASTM D3260-2001(2005) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products《适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法》.pdf

ASTM D3260-2001(2011) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products《适用于工厂的压制铝制品透明涂料的耐酸和耐灰浆标准试验方法》.pdf

ASTM D3260-2001(2017) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products《工厂用压制铝制品透明涂料的耐酸性和耐灰浆性的标准试验方法》.pdf

ASTM D3261-2003 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管用端面热熔接聚乙烯塑料配件标准规范》.pdf

ASTM D3261-2010 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing.pdf

ASTM D3261-2010a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管和管件用热熔接聚乙烯(PE)塑料配件标准规范》.pdf

ASTM D3261-2012 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管和管件用热熔接聚乙烯(PE)塑料配件的标准规格》.pdf